1, before the use of the transmission shaft must be in the universal joint, the middle support and sliding spline and other places such as the oil injection injection car special grease.

2, in the car every 7 days or 2000 kilometers must be universal joint, intermediate support and sliding spline at the special grease.

3, because the transmission shaft fastening bolts in the heavy transmission environment is easy to loose, fall off, so the daily maintenance of the transmission shaft is mainly fastening connection bolts and grease. When the universal joint, middle support, sliding spline and other parts of the transmission shaft are filled with special lubricating grease for cars, the nozzle shall be cleaned and unobstructed first, and the clogged or deformed nozzle shall be replaced in time. The amount of oil injected shall be subject to the overflow of new oil. Check the fastening of bolts and nuts in each part of the drive shaft, especially the lug connecting bolts and intermediate supporting bolts, and tighten them according to the specified torque.

The above information is provided by xingtai yuantuo auto parts manufacturing co., LTD.

Company website: http://www.xtytwy.com